羅茨鼓風機齒輪的拆卸是一項技術工作。今天，小編在網上看到一篇文章。他想拆卸和修理羅茨鼓風機，但他不知道如何拆卸齒輪。讓我們簡單談談如何拆卸齒輪！

　　The disassembly of Roots blower gears is a technical task. Today, the editor saw an article online. He wants to disassemble and repair the Roots blower, but he doesn't know how to disassemble the gears. Let's briefly talk about how to disassemble gears!

　　1.拆卸羅茨風機齒輪前言

　　1. Disassemble the Roots blower gear Preface

　　首先，我們需要了解羅茨風機齒輪的配合方式，如錐度配合.過渡配合.錐度過渡配合，對于過渡配合齒輪，需要通過拉拔器拆卸，如何通過液壓安裝，需要通過液壓拆卸。拆卸羅茨鼓風機齒輪時，要觀察，不要硬弓，硬卸！它會損壞軸和齒輪。

　　Firstly, we need to understand the fitting method of Roots blower gears, such as taper fitting Transitional cooperation Conical transition fit, for the transition fit gear, it needs to be disassembled through a puller. How to install it through hydraulic installation requires hydraulic disassembly. When disassembling the Roots blower gear, observe carefully and do not forcefully bow or remove it! It will damage the shaft and gears.

　　2.羅茨風機齒輪壓壓油泵拆卸

　　2. Disassembly of Roots blower gear pressure oil pump

　　小編先上圖，這張圖是上面的羅茨鼓風機齒輪，拆卸方式是手動壓油泵，然后拆卸齒輪。

　　The editor starts with the above picture, which shows the gear of the Roots blower. The disassembly method is to manually press the oil pump and then disassemble the gear.

　　一般沒有知識和工具，請不要拆卸羅茨鼓風機齒輪。手動壓制油泵的方式如下：

　　Without knowledge and tools, please do not disassemble the Roots blower gear. The method of manually pressing the oil pump is as follows:

　　3.錐度配合齒輪拆卸

　　3. Disassembly of taper fitting gear

　　上面的動圖顯示錐度配合的齒輪，通過拉拔器拆卸。

　　The above diagram shows a gear with a tapered fit, which can be disassembled using a puller.

　　4.另附

　　4. Attached separately

　?、贈]有工具請不要自行拆卸；

　?、?Please do not disassemble without tools;

　?、诓鹦读_茨風機齒輪以確保；

　　② Disassemble the gear of the Roots blower to ensure safety;

　?、圩龊脴擞洠?/p>

　?、?Make proper markings;

　　④注意空調；

　　④ Pay attention to the air conditioning;

　?、萑鐭o法維修，請聯系廠家拆卸。

　　⑤ If it cannot be repaired, please contact the manufacturer for disassembly.

　　1.羅茨風機維修流程

　　1. Maintenance process of Roots blower

　　羅茨風機維修流程:拆卸油箱.齒輪.軸承.端蓋葉輪。

　　Roots blower maintenance process: Disassemble the fuel tank gear Bearing. End cover impeller.

　　2.為什么要修理？風機故障是什么？

　　Why repair? What is a fan malfunction?

　　風機維修的主要原因是：更換軸承，檢查風機轉子與墻板、轉子與殼體之間的間隙.轉子檢查。

　　The main reasons for fan maintenance are: replacing bearings, checking the gaps between the fan rotor and wall panels, and between the rotor and the housing Rotor inspection.

　　3.齒輪如何拆卸，軸承如何拆卸？

　　How to disassemble gears and bearings?

　　羅茨鼓風機齒輪采用拉馬，軸承座采用頂桿。關于齒輪拆卸的注意事項，可以點擊這里:齒輪拆卸動圖

　　The gear of the Roots blower adopts a puller, and the bearing seat adopts a top rod. Regarding the precautions for gear disassembly, you can click here: Gear disassembly diagram

　　4.拆卸的重點和難點是什么？

　　What are the key and difficult points of disassembly?

　　拆卸機器的困難在于同步齒輪，齒輪為直齒齒合。主動齒輪用液壓拉馬拖出，從動齒輪用自己的6個齒輪M20螺栓孔加頂桿頂出。軸承座用頂桿頂出。注意頂桿的對稱應力，否則會損壞軸承座。軸承座的材料是鑄鐵。其他的都很簡單。安裝時，先拆裝，再拆裝。注意各部位的縫隙。

　　The difficulty in dismantling the machine lies in synchronizing the gears, which are spur gears. The driving gear is pulled out with a hydraulic puller, and the driven gear is pushed out with its own 6 M20 bolt holes and a top rod. The bearing seat is pushed out with a top rod. Pay attention to the symmetrical stress of the top rod, otherwise it may damage the bearing seat. The material of the bearing seat is cast iron. Everything else is very simple. When installing, disassemble and assemble first, then disassemble and assemble again. Pay attention to the gaps in each part.

　　在選擇羅茨鼓風機型號時，需要一個框架圖也非常重要。如果你清楚地了解羅茨鼓風機的結構，就更容易使用。羅茨鼓風機主要由以下部分組成:

　　It is also very important to have a framework diagram when choosing a Roots blower model. If you have a clear understanding of the structure of Roots blower, it will be easier to use. The Roots blower mainly consists of the following parts:

　　機殼.墻板.葉輪.油箱.五部分組成。

　　Chassis Wall panels impeller. Fuel tank Composed of five parts.

　　外殼：主要支撐（墻板）.葉輪.）和固定效果。和固定效果。

　　Shell: Main support (wall panel) impeller. ）And fixed effects. And fixed effects.

　　墻板：主要用于連接外殼和葉輪，支撐葉輪的旋轉，起到端面密封的作用。

　　Wall panel: mainly used to connect the shell and impeller, support the rotation of the impeller, and play a role in end face sealing.

　　葉輪:是羅茨風機的旋轉部分，分為二葉和三葉，但由于三葉的出氣脈沖小于二葉，.噪音更小.運行更穩定等諸多優點已逐漸取代二葉羅茨風機。

　　Impeller: It is the rotating part of a Roots blower, divided into two blades and three blades. However, due to the fact that the exhaust pulse of the three blades is smaller than that of the two blades Less noise Many advantages such as more stable operation have gradually replaced the two blade Roots fan.

　　油箱：主要用于儲存潤滑齒輪和軸承的潤滑油。

　　Oil tank: mainly used to store lubricating oil for lubricating gears and bearings.

　　本文由 羅茨鼓風機  友情奉獻.更多有關的知識請點擊  http://m.iyouth-china.com/  真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Roots blower For more related knowledge, please click http://m.iyouth-china.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.