旋轉供料器的檢修過程

　　The maintenance process of the rotary feeder

　　了解到有不少地方的企業對使用旋轉供料器的一些問題不是很清楚，在此為大家簡單分析一下，合理的操作才會讓星型卸料器正常運轉，而想要保持卸料的順暢只有使用好的設備了，使用的時候要重點考慮其運轉是否符合要求，卸料的速度等環節是否屬于正常，生產系統中進行灰塵等廢物回收后就需要排除系統，這個設備的好壞對于灰塵的排出有著直接的影響，很顯然必須對該設備的便用多加認識，就是要提高卸料設備的排料的順暢，有時物料受高溫，以及管道等影響形成了結塊，這種情況的出現是很不好的。

　　I have learned that many companies in certain areas are not very clear about some issues related to the use of rotary feeders. Here is a brief analysis for everyone. Reasonable operation is necessary to ensure the normal operation of the star shaped unloader. To maintain smooth unloading, only good equipment can be used. When using it, it is important to consider whether its operation meets the requirements and whether the unloading speed and other links are normal. After dust and other waste recycling in the production system, the system needs to be eliminated. The quality of this equipment has a direct impact on the dust discharge. Obviously, it is necessary to have a better understanding of the usability of the equipment, which is to improve the smooth discharge of the unloading equipment. Sometimes, materials may form lumps due to high temperature and pipeline influence, which is very bad.

　　這些結塊不規律的能進入卸料設備里，如果在生產中不能及時清理的話，就很容易對旋轉供料器設備有不好的影響。只有確保運轉的順暢，才能確保收塵的完成，而這就需要確保操作星型卸料器時注意運轉的狀況，尤其是對灰塵的溫度，是否有結塊等異常要注意觀察，確保其正常順利的生產運行。作為除塵領域重要配套設施，星型卸料器主要在除塵設備排灰、送風和給料方面發揮著無可替代的作用，是除塵系統穩定運行的有力保障。

　　These irregular lumps can enter the unloading equipment, and if they are not cleaned in time during production, they can easily have a negative impact on the rotating feeder equipment. Only by ensuring smooth operation can the dust collection be completed, which requires paying attention to the operating conditions of the star shaped unloader, especially the temperature of the dust and whether there are any lumps or other abnormalities, to ensure its normal and smooth production operation. As an important supporting facility in the field of dust removal, star shaped unloaders play an irreplaceable role in the discharge, air supply, and feeding of dust removal equipment, and are a powerful guarantee for the stable operation of dust removal systems.

　　當旋轉供料器發生故障怎么辦呢，為大家講述一下卸料器的檢修過程:

　　What should I do if the rotary feeder malfunctions? Let me explain the maintenance process of the unloader:

　　一，在星型卸料器在出廠以前，應該把潤滑油或潤滑脂給填滿，防止過早讓卸料器的軸承發生損毀。不過在用了六個月后要及時增填或者更換潤滑油，并且如果溫度過高的話要加快填油的速度。

　　1、 Before leaving the factory, the star shaped unloader should be filled with lubricating oil or grease to prevent premature damage to the bearings of the unloader. However, after six months of use, it is necessary to promptly add or replace lubricating oil, and if the temperature is too high, the oil filling speed should be accelerated.

　　二，星型卸料器一般情況下都是連續工作的，如果在運轉過程中有漏風或者漏灰事情發生的話，應該把壓料蓋給擰緊，或者直接更換一下石棉盤根再壓緊料蓋也可以的。

　　2、 Star shaped unloaders generally work continuously. If there is any air or dust leakage during operation, the material cover should be tightened or replaced with asbestos packing before tightening the material cover.

　　三，如果星型卸料器運送的是黏性較大的物料，造成了機器超載，應該及時安裝過載防護設備或者把舊電機換掉，安裝大功率的電動機。只有保證了收塵的排出正常才能更好的實現除塵，對于那些回收廢氣費物的系統來說，一定要及時檢查排料設備的運行狀況，而這就涉及到旋轉供料器是否正常。在實際操作時也要看是否有漏灰的情況，如果有的話壓緊相應的壓料蓋就可以。

　　3、 If the star shaped unloader transports materials with high viscosity, causing machine overload, overload protection equipment should be installed in a timely manner or the old motor should be replaced with a high-power motor. Only by ensuring the normal discharge of dust collection can dust removal be better achieved. For systems that recycle waste gas and materials, it is necessary to check the operation status of the discharge equipment in a timely manner, which involves whether the rotary feeder is normal. In practical operation, it is also necessary to check whether there is any leakage of dust. If there is, simply press the corresponding material cover tightly.

　　企業想要實現生產無污染也是離不開星型卸科器的應用，尤其這需要合理的較大程度發揮其使用功能，這包括操作技術的熟練程度等。但是要注意對于環境溫度的控制，因為有些卸料器受溫度的影響很大，尤其對于普通型的，這就要對物料進行降溫處理了。

　　The application of star shaped unloaders is essential for enterprises to achieve pollution-free production, especially in terms of maximizing their functionality, including proficiency in operating techniques. However, attention should be paid to controlling the ambient temperature, as some unloaders are greatly affected by temperature, especially for ordinary types, which requires cooling treatment of the materials.

　　當然想要發揮卸料設備的極佳作用，更要求操作工的技術能力有保證，因為科學的操作不僅能發揮其功效，更能對其使用時間的延長有幫助。歡迎您前來洽談合作，熱情期待您的光臨。

　　Of course, in order to fully utilize the unloading equipment, it is even more necessary to ensure the technical ability of the operators, because scientific operation can not only enhance its effectiveness, but also help extend its usage time. Welcome to discuss cooperation, we warmly look forward to your visit.